Traditional Bathrooms Limited Are Approved Stockists Of BC Designs
BC Designs: Luxury bathroom design from Traditional Bathrooms Limited has just got even better. Traditional Bathrooms Limited are approved stockist of BC Designs luxury bathroom products. Along with Imperial Bathrooms, BC Designs are the bathroom industries benchmark for high quality luxury bathrooms. If you want to give your new bathroom project that all important “WOW” factor, then BC Designs is the brand for you.
EXCELSIOR Polished Bath with Ball & Claw Feet from BC Designs
Another first for BC Designs – a solid cast aluminium bath with matching polished ball and claw feet.
These baths weigh approximately 110 Kilos. The feet can be removed for ease of installation..
Maximum size
l. 1780mm x w. 760mm h.755mm
This is a cast aluminium product polished by hand – blemishes such as dimples, small holes etc are part of the bath’s character and should not be deemed as faults. There may be colour differences on the outside of the baths brought out by the rigorous polishing and variations in the aluminium.
EXCELSIOR Polished Bath with Small Plinth from BC Designs
Cast in solid marine grade aluminium with a bonded acrylic liner for maximum heat retention. This beautiful hand polished bath now suits both contemporary and traditional settings.
These baths weigh approximately 130 Kilos plinth can be removed for ease of installation.
Maximum size
l. 1780mm x w. 760mm h.685mm
IMPORTANT: Customers please note
When a U-bend is fitted to the bath with plinth, it will protrude below the floor level. Therefore, a small recess will have to be made under the bath to fit all wastes. Allow a minimum of 40mm below the floor for this. The plinth will hide this recess and waste fittings.
This is a cast aluminium product polished by hand – blemishes such as dimples, small holes etc are part of the bath’s character and should not be deemed as faults. There may be colour differences on the outside of the baths brought out by the rigorous polishing and variations in the aluminium.
EXCELSIOR Primed Bath with Primed Plinth from BC Designs
Cast in solid aluminium, coated with black primer – ready to paintin a colour to match your scheme.
These baths weigh approximately 130 Kilos plinth can be removed for ease of installation.
Maximum size
l. 1780mm x w. 760mm h.685mm
IMPORTANT: Customers please note
When a U-bend is fitted to the bath with plinth, it will protrude below the floor level. Therefore, a small recess will have to be made under the bath to fit all wastes. Allow a minimum of 40mm below the floor for this. The plinth will hide this recess and waste fittings.
EXCELSIOR Primed Bath with Ball & Claw Feet from BC Designs
Cast in solid aluminium, coated in black primer – ready to paint in a colour to match your scheme.
These baths weigh approximately 110 Kilos. The feet can be removed for ease of installation..
EXCELSIOR Primed Bath with Polished Plinth from BC Designs
Cast in solid aluminium, coated with black primer – ready to paint in a colour to match your scheme.
These baths weigh approximately 130 kilos. The plinth can be removed for ease of installation.
Maximum size
l. 1780mm x w. 760mm h.685mm
IMPORTANT: Customers please note
When a U-bend is fitted to the bath with plinth, it will protrude below the floor level. Therefore, a small recess will have to be made under the bath to fit all wastes. Allow a minimum of 40mm below the floor for this. The plinth will hide this recess and waste fittings.
The plinth is a cast aluminium product polished by hand – blemishes such as dimples, small holes etc are part of the bath’s character and should not be deemed as faults. There may be colour differences on the outside of the baths brought out by the rigourous polishing and variations in the aluminium.
EXCELSIOR Primed Bath with Ball & Claw Feet from BC Designs
Cast in solid aluminium, coated in black primer – ready to paint in a colour to match your scheme.
These baths weigh approximately 110 Kilos. The feet can be removed for ease of installation..
Maximum size
l. 1780mm x w. 760mm h.755mm
Taps and waste sold separate.
EXCELSIOR Primed Bath with Polished Plinth from BC Designs
Cast in solid aluminium, coated with black primer – ready to paint in a colour to match your scheme.
These baths weigh approximately 130 kilos. The plinth can be removed for ease of installation.
Maximum size
l. 1780mm x w. 760mm h.685mm
IMPORTANT: Customers please note
When a U-bend is fitted to the bath with plinth, it will protrude below the floor level. Therefore, a small recess will have to be made under the bath to fit all wastes. Allow a minimum of 40mm below the floor for this. The plinth will hide this recess and waste fittings.
The plinth is a cast aluminium product polished by hand – blemishes such as dimples, small holes etc are part of the bath’s character and should not be deemed as faults. There may be colour differences on the outside of the baths brought out by the rigourous polishing and variations in the aluminium.
EXCELSIOR White Acrylic Bath with Ball & Claw Feet from BC Designs
A fine quality double skinned acrylic bath with polished feet. This double ended slipper bath will give you years of comfortable use with a deep inner for maximum bathing space.
This bath weighs approximately 45 kilos. The feet can be removed for easy installation
Maximum size
l. 1780mm x w. 760mm h.755mm
Taps and waste sold separate.
EXCELSIOR White Acrylic Bath with Aluminium Plinth from BC Designs
A fine quality double skinned acrylic bath with a polished aluminium plinth. This double ended slipper bath will give you years of comfortable use with a deep inner for maximum bathing space.
This bath weighs approximately 45 kilos. The plinth can be removed for easy installation
Maximum size
l. 1780mm x w. 760mm h.685mm
IMPORTANT: Customers please note
When a U-bend is fitted to the bath with plinth, it will protrude below the floor level. Therefore, a small recess will have to be made under the bath to fit all wastes. Allow a minimum of 40mm below the floor for this. The plinth will hide this recess and waste fittings.
This is a cast aluminium product polished by hand – blemishes such as dimples, small holes etc are part of the bath’s character and should not be deemed as faults. There may be colour differences on the outside of the baths brought out by the rigorous polishing and variations in the aluminium.
Taps and waste sold separate.
KUBA Bath from BC Designs
A very spacious square acrylic mix bath for the ultimate bathing experience. The back ledge of the wall mounted version is not angled to give a perfect seal against tiles. The freestanding version has angles on all 4 top edges and will not fit flat against a wall.
The 1840mm x 940mm KUBA bath allows plenty of space for 2 people to lounge in minimalist luxury.
The panel and bath are seamlessly formed into one to give clean lines and a stylish look. Tap holes can be drilled by the customer to suit.
Maximum size
l. 1840 x w. 940mm x h.610mm
Please specify wall mounted (back to wall) or freestanding.
Taps and waste sold separate.
ROMANBATH from BC Designs
The ROMANBATH has been faithfully reproduced from an original fireclay bath which was manufactured in Victorian times.
Each suited to contemporary or classical styles of bathroom, the ROMANBATH adds a monolithic grandeur to any setting.
These magnificent composite baths have a durable high gloss polymer surface which is abrasive resistant. This is non porous and hygienic and will retain its beauty throughout the lifetime of the product.
This is a truly fabulous bath with plenty of room inside to lounge and enjoy.
These baths weigh approximately 95kg (excluding feet)
Square feet 3.8kg each
Globe feet 5.2kg each
capacity – 325 litres
The ROMANBATH can be supplied with solid cast, round or square feet for an even bolder look.
Maximum size
l. 1804 x w. 850mm h.610mm
Height with square feet 723mm
Height with globe feet 743mm
Taps and waste sold separate.
Thinn DELICATA Bath from BC Designs
DELICATA – a slipper bath for contemporary bathrooms designed with confort in mind and manufactured in a one piece solid casting from Cian. A warm colour-through material. The overflow is built into the skin of the bath at the lower end.
These baths weigh approximately 92 kilos
Water capacity – 190 litres
Maximum size
l. 1520mm x w. 730mm h.580-680mm
Supplied with a push down waste.
Chrome only
The DELICATA is also available with no overflow to order giving the option of fitting an overflow filling system such as Exafil. Customers will be required to drill their own holes for this.
Taps sold separate.
Thinn FENG Bath from BC Designs
For lovers of the current trend for square fittings, the FENG bath gives both space and a surprising amount of comfort. The FENG is a rimless bath, which is cast in one piece with a hidden overflow pipe built into the body. Ergonomically designed in solid colour.
These baths weigh approximately 105 kilos
Water capacity – 190 litres
Maximum size
l. 1680mm x w. 700mm h.585mm
Supplied with a push buttom waste only.
Chrome only
The FENG is also available with no overflow to order giving the option of fitting an overflow filling system such as Exafil.
Thinn KURV Bath from BC Designs
Our KURV solid-surface bath is a combination of trend setting design and technical achievement. The minimalist KURV bath is both comfortable and stylish and will enhance any bathroom. Being rimless, KURV gives maximum bathing area.
These baths weigh approximately 94 kilos
Water capacity – 180 litres
Maximum size
l. 1890mm x w. 890mm h.560mm
With the standard KURV bath the waste pipe needs to be run under the floor. If the waste has to run above the floor, you can order an additional plinth to raise the level of the bottom of the bath.
The KURV is also available with no overflow to order giving the option of fitting an overflow filling system such as Exafil. Customers will be required to drill their own holes for this.
Taps and waste sold separate.
Thinn SHUI Bath from BC Designs
The SHUI bath was designed from the inside out – that is, with the prime expectation that the bath should give comfort and space in a classically simplistic design.
Cast in one piece from CIAN, the solid colour material, the SHUI bath enhances both contemporary and classic bathrooms.
The overflow is cast seamlessly into the body of the bath.
These baths weigh approximately 89 kilos
Water capacity – 180 litres
Maximum size
l. 1680mm x w. 700mm h.570mm
Supplied with a push down waste.
Chrome only
The SHUI is also available with no overflow to order giving the option of fitting an overflow filling system such as Exafil. Customers will be required to drill their own holes for this.
Taps sold separate.
Thinn TASSE Bath from BC Designs
The TASSE solid surface bath, for lovers of oval and egg shaped designs, gives great bathing space within a delicate look.
These baths weigh approximately 92 kilos
Water capacity – 180 litres
Maximum size
l. 1770mm x w. 880mm h.550mm
With room beneath to allow the waste to go above or below the floor level, the TASSE is supplied with a push down waste and flexible waste pipe outlet.
The TASSE is also available with no overflow to order giving the option of fitting an overflow filling system such as Exafil. Customers will be required to drill their own holes for this.
Taps sold separate.
EXCELSIOR Primed Bath with Chrome Plated Plinth from BC Designs
Cast in solid aluminium, coated with black primer – ready to paint in a colour to match your scheme.
These baths weigh approximately 130 kilos. The plinth can be removed for ease of installation.
Maximum size
l. 1780mm x w. 760mm h.685mm
IMPORTANT: Customers please note
When a U-bend is fitted to the bath with plinth, it will protrude below the floor level. Therefore, a small recess will have to be made under the bath to fit all wastes. Allow a minimum of 40mm below the floor for this. The plinth will hide this recess and waste fittings.
Taps and waste sold separate.
www.victorianbathrooms4u.com
Leave a Comment » | 
Baths, Hudson Reed, Imperial Bathrooms, Showers, bathroom business news, bathroom suites, taps | Tagged: bath store, bathroom, bathroom design, bathroom furniture, bathroom suites, bathrooms, cast iron baths, hudson reed, Imperial Bathrooms, luxury bathrooms, roll top baths, victorianbathrooms4u.com | 
Permalink
Posted by bathroomsuite 
Posted by bathroomsuite 
Posted by bathroomsuite 
